TERMOFOL TF-310TT heating film – 100 cm wide, 80 W/m², sold by the meter
TERMOFOL TF-310TT heating film is a thin, flexible infrared heating element 100 cm wide with an output of 80 W/m², which gives 80 W per running meter. The film is sold by the meter – you order exactly as much as you need for the planned strips, without buying a whole roll.
The film is only 0.338 mm thick. Its base is a PET film with high resistance to mechanical damage and abrasion, onto which carbon and silver paste heating elements are applied in layers. Power is supplied through copper busbars running along the edges of the film, and the graphite strips emit heat as infrared radiation across their entire surface.
An output of 80 W/m² is intended for buildings with good or very good insulation – it works well in new and thermally upgraded houses and apartments. The maximum film temperature is 32°C.
Technical data
- Model: TF-310TT
- Width: 100 cm
- Thickness: 0.338 mm
- Heat output: 80 W/m²
- Output per running meter: 80 W
- Power supply: 230 V AC, 50 Hz
- Max. film temperature: 32°C
- Max. length of a single strip: 16 m
- Resistance of 1 m² of film (approx.): 661 Ω
- Protection class: II – no earthing required
- Sold: by the running meter
- Warranty: 6 years, up to 15 years after registration
- Marking: CE
Main advantages
- only 0.338 mm thick – the film practically does not raise the floor level
- even heat across the entire heated surface
- fast warm-up – the film lies directly beneath the finishing layer, without screed
- dry installation under floating floors and in plasterboard walls and ceilings
- can be cut to size along the cutting lines printed on the film
- sold by the meter – you pay only for the length you need
- protection class II
- 6-year warranty, extendable to 15 years after product registration
Installation – what to remember
- the film must always be controlled by a thermostat with a floor sensor – installation without a thermostat is not permitted
- an insulating underlay is laid under the film and a vapour barrier film on top of it
- the film may only be cut with scissors along the marked cutting lines – it must not be cut lengthwise, folded or overlapped
- strips are laid in parallel, 1–3 cm apart and at least 10 cm from walls and fixed furniture
- suitable floor finishes are laminate panels, vinyl panels (on an underlay approved by the floor manufacturer) or floating engineered wood flooring up to 18 mm thick – the film must not be installed under tiles, screed, glued parquet, carpet or linoleum
- the film must not be installed in bathrooms or other damp rooms, outdoors or on stairs
- in walls and ceilings the film is installed under plasterboard, between the profiles of the frame, which must be earthed
- the electrical connection must be made by a qualified electrician; each heating zone requires a circuit breaker and a 30 mA residual current device
TERMOFOL heating films sold by the meter are available in widths of 25, 50 and 100 cm and outputs of 60, 80, 140 and 220 W/m² (Heating films → Buy by the meter). Larger areas are best covered with 100 cm wide strips, filling the remaining space with 50 and 25 cm film, so that the film covers at least 70% of the heated area.
The installation requires accessories: Crocodile Clip or ring connectors, self-vulcanising tape to insulate the connections, LgY 2.5 mm² cable, insulating underlay, vapour barrier film and TERMOFOL mounting tape – you will find them in Heating films → Accessories. If you prefer to buy everything at once, choose a ready-made kit from the Heating film sets category.
The declaration of conformity is available in the Downloads tab. You can extend the warranty to 15 years – simply register the product by e-mail at support@termofol.pl within 30 days of purchase.