TERMOFOL TF-SWT700 metal infrared heater with “The Scream” print – 500 W, 60 × 85 cm
The TERMOFOL TF-SWT700 metal infrared heater combines heating with wall decoration: we print a reproduction of “The Scream” by Edvard Munch on the front of the panel. With an output of 500 W and dimensions of 60 × 85 cm, the panel heats rooms of up to approx. 14 m², and its built-in Wi-Fi thermostat lets you control it from the panel, the remote control or your phone.
Thanks to the print, the panel looks like a picture on the wall – ideal for living rooms, dining rooms, bedrooms or studies, where a conventional radiator would spoil the interior design. An infrared heater gives off heat mainly by radiation – it warms the walls, furniture and people in the room, not just the air.
Lead time: up to 5 working days
We make the panel with your chosen motif to order: the print is applied after you place your order, so the lead time is up to 5 working days. We do the printing ourselves, because covering the panel with foil or painting it yourself may damage the heating element and voids the warranty. The shades of the print may differ slightly from the image on your screen, depending on the display settings.
Key features
- “The Scream” print on the front of the steel panel – a heater that looks like a picture
- built-in thermostat with display – no separate thermostat needed
- Wi-Fi control via the Termofol Smart app (or Tuya Smart): schedule, timer and smart scenarios; 2.4 GHz network
- remote control included – temperature setting, timer and child lock
- open window detection – if the temperature drops sharply, the panel switches off for 30 minutes
- slim design – 15 mm thick, IP44 protection rating
Technical data
- Model: TF-SWT700
- Print motif: The Scream (Edvard Munch)
- Power: 500 W
- Power supply: 220–240 V, 50 Hz
- Recommended area: up to 14 m²
- Dimensions: 60 × 85 cm, 15 mm thick
- Weight: 8.4 kg
- Protection rating: IP44
- Mounting: wall (not suitable for ceiling mounting)
- Control: thermostat on the panel, remote control, Wi-Fi 2.4 GHz (Termofol Smart)
- Lead time: up to 5 working days
- Warranty: 2 years
Installation and safety
- The panel is designed for wall mounting only; a mounting template, wall plugs and screws for solid walls are included (other wall types require suitable fixings).
- Keep at least 40 cm of free space in front of the panel and 20 cm from the sides and the floor; do not install the panel directly below a socket outlet.
- The surface of the operating panel reaches approx. 95°C – do not cover it or use it to dry textiles.
- We recommend having the panel installed by a qualified electrician.
- Clean the print with a soft, slightly damp cloth once the panel has cooled down – do not use abrasives or solvents.
The printed TF-SWT series is available in three sizes: TF-SWT400 (350 W, 60 × 60 cm, up to 8 m²), TF-SWT700 (500 W, 60 × 85 cm, up to 14 m²) and TF-SWT1000 (700 W, 60 × 120 cm, up to 20 m²). You will find more motifs in the Printed heating panels category – in the Artworks and Space sections.